Part Number Hot Search : 
ON1572 2N1613L QFP144 U12JZ47A 4069U 156M0 LNK500P P6KA15A
Product Description
Full Text Search
 

To Download TFS400K Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  TFS400K.doc v e rsi on 3.2 01.12.2003 vi telefilter preliminary specification tfs 400 k 1/5 telefilter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com measurement condition ambient temperature: 23 c input pow er level: 10 dbm terminating impedance: * input: 375 ? ? -1.9 pf output: 375 ? ? -1.9 pf external coil: 47 nh ch aracteristics remark: reference lev e l for the relativ e attenuation a rel of the TFS400K is the minimu m of the pass band attenuation a min . the minimum of the pass band attenuation a min is defined as the insertion loss a e . the centre frequency f c is the arithmetic mean v a lue of the upper and low e r frequencies at the 1 db filter attenuation lev e l relativ e to the insertion loss a e . the nominal frequency f n is fix ed at 400 mhz w i thout tolerance. the giv en v a lues for the relativ e attenuation a rel and for the group delay ripple hav e to be reached at t he frequencies giv en below ev en if the centre frequency f c is shifted due to the temperature coefficient of frequency tc f in the operating temperature range and due to a production tolerance for the centre frequency f c . d a t a ty p. v a lue tolerance / limit insertion loss a e 4 , 5 d b m a x . 6 , 5 d b (reference level) nominal frequency f n 4 0 0 , 0 4 m h z 4 0 0 m h z bandw idth b w 3 d b t . b . d . - relativ e a ttenuation a rel f n . . . f n 8 2 , 5 k h z 0 , 4 d b m a x . 1 d b f n 5 0 0 k h z . . . f n 7 0 0 k h z 2 8 d b m i n . 1 5 d b f n 7 0 0 k h z . . . f n 1 m h z 4 3 d b m i n . 2 7 d b f n 1 m h z . . . f n 1 3 m h z 5 0 d b m i n . 4 0 d b group delay ripple f n 8 2 , 5 k h z 0 , 6 s m a x . 1 s operating temperature range otr - -40 c ... + 85 c storage temperature range - - 40 c ... + 85c frequency inv e rsion temperature 2 0 c - temperature coefficient of frequency t c f ** -0,036 ppm/k2 - *) the terminating impedances depend on parasitics and q-v a lues of matching elem ents and the board used, and are to be understood as reference v a lues only . should there be additional questi ons do not hesitate to ask for an applicat ion note or contact our design team. th ese v a lues hav e to be confirmed by balanced s- parameter measurement. **) ? f(h z ) = t c f (ppm/k) x (t-t 0 )2 x f to (mhz). ge ne ra te d: ch ecked / a p p r o v ed : vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein w i thout notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
TFS400K.doc v e rsi on 3.2 01.12.2003 vi telefilter preliminary specification tfs 400 k 2/5 telefilter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com cons truc tion, pin c onfigura t ion a nd 5 0 ? - ma tc hing ne tw ork (all dimensions in mm) 400 k r20 da t e c o d e 3 1 5 7 5.0 s q +0 . 1 5 -0 . 1 pin 1 sy m. output pin 5 sy m. input pin 2 sy m. output pin 6 sy m. input pin 3 external coil pin 7 ground pin 4,8 package ground date code: y ear + w eek n 2001 p 2002 r 2003 ... 50 ohm test circuit 1 2 1 6 5 4, 7, 8 lb-in lb-out saw c1 l1 c2 l4 l3 l5 l2 3 50 ohm test circuit 2 2 1 6 5 4, 7, 8 lb-in lb-out saw l1 c 1 l2 c4 c 3 3 l3 c2 vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein w i thout notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
TFS400K.doc v e rsi on 3.2 01.12.2003 vi telefilter preliminary specification tfs 400 k 3/5 telefilter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com stability characteristics after the follow i ng tests the filter shall meet the w hole specification: 1. shock: 500g, 18 ms, half sine w a ve, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5g respective ly , 1 octave per min, 10 cy cles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cy cles din iec 68 part 2 ? 14 test n 4. resistance to older heat (reflow ): reflow possible: tw ice max.; for temperature conditions, please refer to the attached "air refl ow temperature conditions" on page 4 packin g tape & reel: iec 286 - 3, w i th exception of value for n and minimum bending radius; tape ty pe ii, embossed carrier tape w i th top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min 300 mm reel of empty components at start including leader: min 500 mm trailer min 300 mm d o p o e f w p 1 embossed carrier tape cover tape g p 2 b o a o ct d 1 tape (all dimensions in mm) w : 12 0,3 po : 4 0,1 do : 1,5 + 0,1 e : 1,75 0,1 f : 5,5 0,05 g (min) : 0,75 p2 : 2 0,05 p1 : 8 0,1 d1(min) : 1,5 ao : 5,3 0,1 bo : 5,3 0,1 ct : 9,5 0,1 a c n w 1 w 2 r e e l ( a l l d i m e ns i o ns i n m m ) : a : 3 3 0 w 1 : 1 2 , 4 + 2 w 2 ( m a x ) : 1 8 , 4 n ( m in ) : 5 0 c : 1 3 + 0 , 5 - 0 , 2 the minimum bending radius is 45 mm. the mount ing surface of the filters faces the bottom side of the embossed carrier tape. th e marking of the filters is able to read if the view is direct ed on the upper side of the carrier tape w i th the sprocket holes on the right side of the tape. vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein w i thout notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
TFS400K.doc v e rsi on 3.2 01.12.2003 vi telefilter preliminary specification tfs 400 k 4/5 telefilter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com a i r re flow te mpe r a t ure c onditions 1st and 2nd air reflow profile name: pre-heating periods main-heat ing periods peak temperature t e mp eratu r e: 150 c - 170 c over 200 c 255 c 5 c t i m e : 60 sec. - 90 sec. 20 sec. - 25 sec. c h i p - m oun t a i r r e f l ow prof i l e ti m e / s e c . t e mper at ur e / c 0 20 40 60 80 100 120 140 160 180 200 220 240 260 0 2 0 4 0 6 0 8 0 100 120 140 160 180 200 220 240 t able for temperature vs. time during the air reflow process t o lerance of temperatures: 5 c time / sec. temperature / c time / sec. temperature / c 0 23 140 160 10 34 150 161 20 46 160 164 30 60 170 170 40 80 180 180 50 103 190 205 60 121 195 230 70 134 200 255 80 143 205 230 90 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120 vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein w i thout notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
TFS400K.doc v e rsi on 3.2 01.12.2003 vi telefilter preliminary specification tfs 400 k 5/5 telefilter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com history version reason of changes name date 1.0 - generate development spec ification. pfeiffer 1 2 . 0 5 . 2 0 0 3 2.0 - modification of electrical data based on tfs400b to support dr. wall 11.06.2003 a group delay ripple of 1 s maximum. - correct reel dimensions. 3.0 - add 1 db pass band of 160 khz. dr. wall 19.06.2003 - shift 15 db limit line to +-500 khz - shift 27 db limit line to +-700 khz - remove values for termi nation impedances and coupling coil. - add 50 ohm test circuit configuration. 3.1 - change frequency band for 1 db pass band and group delay ripple requirement dr. wall 03.07.2003 3.2 - change from development specification to preliminary specification dr. wall 01.12.2003 - add preliminary values for termination impedances - add ty pical values vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein w i thout notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.


▲Up To Search▲   

 
Price & Availability of TFS400K

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X